Why We Enjoy Double Glazed Window Repair (And You Should Also!)

Why We Enjoy Double Glazed Window Repair (And You Should Also!)

Blog Article

Double Glazed Window Repair

Double glazing is a great investment in energy efficiency. It prevents loss of heat during winter months and helps to keep your home cool during summer. Having your double glazed windows repaired as needed is a great method to ensure they are operating effectively.

Over time, your double-glazed windows may experience issues like condensation and misting. This can cause your double glazed windows to be difficult to open or close.

Broken Panes

A rogue baseball or a flying pebble from your lawnmowers or even a heavy storm can break the double panes of your windows, leaving your home exposed to the elements. Even though a glass window that has been damaged isn't easy to fix, it doesn't need to be replaced. In fact the insulated glass between the two panes is still in good condition and you can repair your double-pane window with a little DIY effort.

First, you'll need to take any broken glass from the frame. Be careful to prevent glass shards from falling to the floor or slipping from the frame. Use work gloves to protect your hands and use an abrasive cloth around the damaged glass area to prevent any further injury or cuts. After removing the broken piece, carefully clean the entire frame of the window to eliminate any remaining sealant or debris. It is important to sand rough areas of your frame to create a smooth surface for your new glazing.

After cleaning the frame, you can apply a fresh layer of glass to the seam in which the broken pane was removed. This is the best method to ensure your window stays safe and sealed and aid in reducing energy costs by preventing drafts and water from entering the house. The next step is to select your glazing material. There are several options available, including clear tape which is more durable than regular tape and will help keep your window safe from further cracking, and glazing film that resembles clear plastic wrap. This option has the advantage that it can be painted to match the frame of your window and will also block out rain and ice.

Whatever material you decide to use it's essential to press the glaziers points into the gap where the putty meets your frame. They will help keep the glass in place, and help it adhere to the frame. Hardware stores carry glazier's point ropes that you can roll out on the frame rabbets.

Condensation

If you're experiencing problems with condensation, it's best to contact your window manufacturer. Many companies offer warranties and guarantees to will cover these problems. Fogging or condensation between the windows' panes is a sign that your seals aren't working properly. Only an expert can fix this issue by replacing the panes.

This procedure is a bit complicated and requires the use of specific tools to remove the old pane and install the new one, but it can be accomplished by a professional who will provide the necessary equipment. It is best to delegate the work to a professional. These tools can be dangerous.

Wear safety glasses and gloves if you opt to do it yourself. You may be exposed to flying glass fragments. It is also essential to remove all putty and metal glazing points from the grooves that the new window will go. It is also recommended to wire-brush the frame and vacuum or wipe it with a damp cloth. When the frame is clean and dry you'll need to order a piece of replacement glass which is 1/8 inch less in each direction than your window that you have and then fit it in the grooves.

Based on the frame you have You will then have to apply a thin layer of silicone caulk on the grooves to ensure that your new pane is secured in place. Once the caulk has dried and is dry, you must smooth it out and make any necessary adjustments. The wood molding will then be reinstalled.

Double-glazed windows may become difficult to open or close when the weather is extremely changing. Extreme temperatures can cause frames to shrink or expand and, as a result, they can slide or become stuck. If this is the issue you could try wiping the frames down using water and lubricating joints. However, it may be best to ask the company that installed your windows for help.

Misunderstood

Misted Double Glazing is a window issue that occurs when moisture gets trapped between the glass panes repairmywindowsanddoors of double glazed windows. Double glazing consists of two glass panes which are separated by an insulating area, typically filled with argon gas for better thermal efficiency. This creates an airtight sealing that keeps warm indoor air in, and cold outdoor air out.

The seal may become damaged over time and moisture may build up between the panes of glass which can cause them to turn to appear misty. This happens because the space between the panes is heated by sun, causing water vapour to form within it.

It is a natural phenomenon however, if it happens between the windows' panes it can be a problem because it won't be able to regulate the temperature in the room. Instead, the temperature outside the window will influence the temperature indoors. Northfield Glass can help you when your double-glazed windows begin to fog.

We can replace a single sealed unit without needing to replace the entire window. This is less disruptive than a complete replacement. Our misty window repair involves removing the glass, cleaning it, and replacing it with a fresh one to make an watertight seal.

There are some companies in the industry that claim to cut holes into your windows that are misting and inject chemicals into them that they claim will eliminate the fog & condensation, however, we do not recommend this procedure. This is not only unattractive, but could also damage the toughened glass and leave you with a window that doesn't function properly.

It is essential to address the problem as soon as possible, as left untreated, it could result in the growth of mould that not only damages the window, but also poses health risks for your family members. The moisture in the window may cause other issues with your property such as damp or rot. In some instances it is possible to replace the entire window.

Failed or Blown

Modern double-glazed windows feature two glass panes that have an inert gas or air between them. This helps to improve their thermal efficiency, allowing heat in and cold out. Over time, the gas can depressurize and cause a variety of problems.

Condensation in between the panes is among the most common. While it is a natural event, it doesn't necessarily mean that your window is damaged, it can be an indication that you need to seal your windows. Condensation is also an indication of broken double glazing, which could require a re-installation.

Also, look out for draughts coming from your double-glazed windows. It could be due to an issue with the seal or a damaged handle lock. A draught can be quite evident and can result in higher heating costs, so it is important to get it fixed sooner rather than later. Check the seals around the window frame by feeling the cold air.

You may also see water beads on the inside of windows when your window seals are failing. This is a good indicator that you need to re-seal your double glazed windows.

Your window frames are made to move a little bit, as they need to do to keep the glass sheets in place. Over time, this special packaging material can become compacted. This will cause the seal to be broken. This allows air to circulate between the panes, which will reduce the energy efficiency of your window.

Double glazing that has ruptured an air seal is an indication of failure and should be repaired as soon as possible. A damaged seal can stop your double glazing from fulfilling its primary purpose which is to keep the cold out and warm air in. A blown seal can also let moisture in your home, which can lead to mold and other unpleasant conditions. It is important to contact a specialist in double glazing repair when you notice a blown seal in your double glazed windows, as they are able to replace the whole unit.